Free tool

Mobile detailing water tank & generator sizing calculator

Size your water tank capacity, calculate cars-per-fill, and determine the exact generator or inverter wattage needed for your mobile detailing van setup.

Fresh Water Sizing

Water Tank Configuration

Configure your fresh water storage, pressure washer flow rate, and average trigger duration.

Generator Load

Electrical Equipment & Power Draw

Select which equipment runs on your mobile electrical system.

Operation Mode

Outputs

Calculated Setup Metrics

Usable Water
55 gal
Cars / Full Tank
4 cars
Continuous Run
39 min

Water Capacity Assessment

A 65-gallon tank easily covers your 4-job route with ~10 gallons of reserve capacity. Remember full water weight is 542 lbs—verify your vehicle's payload capacity.

Electrical & Generator Sizing Assessment

A 3,500W–4,500W inverter generator gives you ample headroom for dual operators or high-draw tools (pressure washer + continuous lighting/extractors) without tripping circuit breakers.

Recommended Generator Rating

3,500W – 4,500W Open Frame or Inverter (e.g. Predator 3500 / Champion 4500)

CONTINUOUS DRAW
1750 W
~14.6 Amps @ 120V
STARTUP PEAK SURGE
2650 W
Includes initial motor startup

Manage routes, clients, and vehicle walkaround photos free on Rinse.

FAQ

Quick answers while you draft—nothing leaves this browser.

What size water tank is best for a mobile detailing van?
For solo operators doing 3–5 daily jobs with an electric pressure washer (1.2–1.4 GPM), a 65-gallon to 90-gallon tank is the sweet spot. A 65-gal tank weighs ~542 lbs full, easily fits inside compact vans (Transit Connect, ProMaster City), and leaves enough payload capacity for tools and chemicals.
Should I buy an inverter generator or open-frame generator?
Always choose an inverter generator (e.g. Honda EU2200i, Predator 3500 Inverter, Champion Inverter). Open-frame construction generators run at 70–78+ dBA and produce noisy harsh exhaust that triggers customer complaints in residential driveways. Inverter generators run at 53–58 dBA, produce clean sine-wave electricity for electronic tools, and throttle down when idling.
How many gallons of water does it take to wash a car with a mobile pressure washer?
A typical exterior foam and two-bucket contact wash uses 8 to 14 gallons of water when paired with a 1.2–1.5 GPM electric pressure washer and short trigger bursts. Large trucks or heavy mud decontaminations may require 18–25 gallons.

Last reviewed: