Free tool
Mobile detailing rig weight & payload safety calculator
Calculate water tank mass, equipment weight, GVWR safety headroom, and trailer tongue weight distribution. Free and client-side.
Rig & Vehicle Platform
Water Tank & Fluid Mass
Water weighs exactly 8.34 lbs per gallon. 90 gallons = 751 lbs of liquid payload.
Major Equipment & Machinery
Payload & Safety Results
- Total Payload
- 1,351 lbs
- Capacity Used
- 54%
- Headroom
- 1,149 lbs
- Tongue Target
- 235–353 lbs
Rated Payload Limit:2,500 lbs
Water Fluid Mass (90 gal):751 lbs (55.6%)
Equipment & Gear Mass:600 lbs
Curb Platform Weight:1,000 lbs
BALANCED LOAD: Operating at a healthy 54% capacity with 1,149 lbs payload headroom for supplies, fuel, and dirty towels.
DYNAMIC WATER SLOSH: 90 gallons creates 751 lbs of shifting liquid mass (55.6% of your payload). Ensure tank has interior baffles and is mounted directly over the axle(s) to avoid trailer sway.
TONGUE WEIGHT TARGET: Ensure 10%–15% of gross weight (235–353 lbs) rests on the hitch ball. Less than 10% causes dangerous highway fish-tailing; over 15% overloads vehicle rear suspension.
Manage your service vans, trailers, and routes in one free CRM.
FAQ
Quick answers while you draft—nothing leaves this browser.
How much does water weigh in a mobile detailing tank?
Water weighs 8.34 lbs per gallon. A 50-gallon tank adds 417 lbs of liquid payload; a 90-gallon tank adds 751 lbs; and a 200-gallon tank adds 1,668 lbs. Water is almost always the heaviest single item on a detailing rig.
What is the difference between GVWR and Payload Capacity?
GVWR (Gross Vehicle Weight Rating) is the absolute maximum safe operating weight of the vehicle/trailer including its own curb weight, fuel, driver, passengers, tools, and water. Payload Capacity is GVWR minus the empty curb weight.
What are the legal and mechanical risks of an overloaded detailing rig?
Overloaded rigs risk premature transmission failure, warped brake rotors, broken leaf springs, and tire blowouts. Legally, operating over GVWR can result in DOT commercial citations and immediate denial of liability coverage by insurance providers if an accident occurs.
What is the correct tongue weight for a mobile detailing trailer?
Standard bumper-pull utility trailers require 10% to 15% of the gross loaded trailer weight on the tongue (hitch ball). Less than 10% causes severe, uncontrollable trailer sway at highway speeds.
Last reviewed: