Free tool
Paint Thickness Gauge & Polish Depth Chart
Convert mils and microns, audit factory clear coat thresholds, and determine safe machine compounding limits to prevent clear coat strike-through.
Paint Audit
Gauge Measurement & Vehicle Class
Average modern factory paint measures 90–140 µm (3.5–5.5 mils).
Reference Chart
OEM Factory Baseline Reference
| Automaker | Total Paint | Clear Coat | Hardness |
|---|---|---|---|
| Japanese Soft | 90–115 µm | 30–40 µm | Soft |
| German Ceramic | 125–160 µm | 45–65 µm | Hard |
| Domestic Truck | 110–140 µm | 40–55 µm | Medium |
| Tesla / Lucid | 85–115 µm | 28–38 µm | Soft/Thin |
Safety Audit
Clear Coat Audit & Polish Safety
- Total Depth
- 115 µm
- Estimated Clear
- 52 µm
- Stage Removal
- ~3.5 µm
- Clear Remaining
- ~48.5 µm
VERDICT: [SAFE]
Safe Depth for Planned Correction
Healthy total paint depth (115 µm / 4.53 mils) with an estimated 52 µm of clear coat. Planned One-Step Paint Enhancement will remove ~3.5 µm (~7% of clear), leaving ample protective buffer.
UV Absorber Protection Rule
Industry Rule: Never remove more than 25% of the total factory clear coat (or >7.5 microns / 0.3 mils) over the vehicle's lifetime. 90% of OEM UV blockers are concentrated in the top 20% of the clear coat layer.
Log pre-existing scratches, paint defects, and customer sign-offs directly in the Rinse mobile app.
FAQ
Quick answers while you draft—nothing leaves this browser.
How much clear coat can you safely polish off a car?
As a strict rule of thumb, you should never remove more than 25% of the total factory clear coat thickness (or ~7.5 microns / 0.3 mils) over the entire lifetime of the vehicle. OEM clear coats contain UV absorbers that protect the color base coat from fading; these UV blockers concentrate primarily in the top 20–25% of the clear coat.
What is the difference between mils and microns on a paint gauge?
One mil is one thousandth of an inch (0.001"). One micron (µm) is one millionth of a meter. To convert mils to microns, multiply by 25.4 (e.g., 5.0 mils × 25.4 = 127 microns). Professional detailers typically prefer microns because they offer finer granularity for measuring compound removal.
How can you tell if a panel has been repainted using a paint gauge?
Factory paint usually reads consistently between 90 and 140 microns across all steel and aluminum panels. If one door or fender suddenly spikes to 200–350+ microns, it has been resprayed with aftermarket base and clear coat. Conversely, if a panel reads below 70 microns, it may have been aggressively wet-sanded in a previous repair.
Last reviewed: